Meoded Marmorino Intonaco Texturing Plaster, Lime-Based Decorative Wall Finish, Stone Effect Coating for Interior & Exterior Surfaces, Medium Grain, 1 Gallon

Description

Genuine Venetian-Style Marmorino Intonaco: Made from natural lime, creating a breathable, mineral-based finish for premium decorative wall applications
Versatile Application: Engineered for versatility, Intonaco performs beautifully on both indoor and outdoor surfaces, making it suitable for residential and commercial projects
Coverage Area: Gallon covers approximately 15-35 sq ft for 2 coat application
Surface Preparation: Surface should be smooth, clean and dust free. It is recommended to apply over a level 4-5 wall
New Surface Preparation: Surface should be smooth, clean and dust free. Prime the substrate with the recommended water based primer as required; such as a PVA primer for new drywall, multi-purpose primer for wood or glossy surfaces, and let it dry fully. Next apply one coat of Meoded Quartz Primer allowing it at least 3-5 hours to dry
Existing Surface Preparation: Any surface with sheen should be sanded, dust free, and then primed with a water based multi-purpose primer letting it dry fully. Next apply one coat of Quartz Primer allowing it at least 3-5 hours to dry. Preparation of flat surfaces require only the application of Quartz Primer
Exterior Brown Coat Application: First, the surface should be pressure washed and cleaned. When the surface is fully dry, apply Quartz Primer diluted with up to 25% water. Let it dry for at least 3-5 hours. Over the brown coat, it is recommended to apply three thin coats of Intonaco to get a smooth surface
First Coat Application: Use a stainless steel rounded edge trowel or spatula to apply two coats of Intonaco. Intonaco should be applied thinly and evenly, covering the entire wall. It is recommended to use a damp sponge in a circular motion before Intonaco dries to create a more uniform design, expose the aggregate, and eliminate all imperfections. Allow at least 12 hours for the first coat to dry
Second Coat Smooth Finish: Apply the second coat in the same manner as the first coat, but this time apply it a bit thicker. Spread the material evenly maintaining the same thickness across the wall. For a smooth finish, smooth the wall with the trowel applying minimal pressure and cleaning off all excess material. Then, let the plaster dry for a minimum of 12 hours. Next, smooth the wall by sanding the surface with 150 grit sandpaper and following with 300+ grit
Heavy Texture Application: Intonaco’s medium size grain allows for the creation of heavy textures such as flutes and distressed finishes. It is recommended to build heavy textures by applying multiple thin coats rather than thick coats to avoid cracking